|
Model NV-8PS13-PVD 8-Channel Power Supply
Passive Receiver Hub
The 8-channel NV-8PS13-PVD is a key hybrid component that consolidates all CCTV system cabling
using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom
Closet or MDF/Equipment Room, the Power Supply Passive Video Receiver Hub has independently selectable 24VAC-OFF-28VAC outputs that can support at-distance camera loads up to 1 Amp per channel.
Use with NVT’s NV-216A-PVor NV-218A-PVD for cable runs under 750ft (225m). A built-in passive receiver
hub allows connection to DVR or an encoder for IP transmission. Per-channel diagnostic LEDs display
load/no-load, miswires, or fault conditions at a glance. Automatic-reset fault protection, transient protection,
and ground loop free individually floating outputs. All NVT products are UL and cUL listed, and compliant with
CE, RoHS, WEEE and come with NVT’s lifetime warranty.
NV-8PS13-PVD
Specifications * |
Camera Power-Video-Data Connections |
|
See Camera Connections
|
Power Output |
|
Each camera is powered by a fully isolated (floating) Class 2 SELV output, individually switchable 24VAC / Off / 28VAC at up to 1 Amp, Each ouput is individually thermistor protected for auto-reset after fault removal.
|
Wire Distance |
Supply voltage, wire resistance and minimum camera operating voltage determine the maximum camera distance. Examples assume a minimum 21VAC at the camera: |
See Product Chart. |
Front-Panel LEDs |
Blue LED |
System Power On |
Per-channel LED indicates: |
Off |
No load connected |
Green |
Load connected & working |
Amber |
Mis-wiring detected |
Red |
Overload fault condition |
Control Room Data |
|
See Data Connections
|
Power Input |
On-off switch |
Rear panel |
Voltage |
115 / 230 VAC |
Current |
2.5 / 1.25 Amps |
Wattage (maximum consumed) |
250 Watts |
Heat Dissipated |
100 BTU / Hour (power supply only)
900 BTU / Hour (power supply with cameras) |
Environmental |
Ambient Temperature |
0 to 122 F (-20 to +50 C) |
Minimum Airflow |
20 ft 3/min (0.5m 3/min) |
Humidity (non-condensing) |
0 to 95% |
Transient Immunity |
per ANSI 587 C62.41 |
Mechanical |
Dimensions, including connectors |
19 in. wide, 1.73 in. high, 8 in. deep
483 mm wide, 44 mm high, 203 mm deep |
Weight |
14 lb. (6.35kg) |
Mounting |
NV-RMBK2 Rear Mount Support Kit (designed for use with thinner metal equipment racks) NV-WMBK2 Wall Mount Bracket Kit (heavy duty) |
Regulatory |
|
|
* Specifications subject to change without notice. |
|
 |
|
|
Features
Provides Class 2 SELV camera power while receiving video transmission
and delivering P/T/Z telemetry all over a single 4-pair Cat5e cable.
Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
Independently selectable 24VAC-OFF-28VAC with 1 Amp per channel
Automatic-reset fault protection; transient protection
Individually floating outputs ensure total ground-loop immunity
Diagnostic LEDs show load/no load, miswires, and overload conditions
Use with the NV-216A-PV or the NV-218A-PVD transceiver at the camera
Power cameras via UTP over significant distances
1 U high; 8" deep; wall, desk, or rack-mountable
Limited lifetime warranty
|
|
|
|
Download Architectural Drawings
|
