NVT
International Sites
Network Video Technologies HomeProductsApplicationsLearning CenterSalesAbout UsWhat’s NewContact Us
Products

NV-813A

The NVT Model NV-813A is an 8-port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported.

"Up the coax" type P/T/Z signals may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of the NV-813A Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent.

Specifications *

Video

Frequency Response

DC to 5 Mhz

Attennuation

0.5 dB typ

Common-mode/Differential-mode Rejection

15KHz to 5 Mhz

60 dB typ

Impedance

Coax, female BNC

75 ohms

UTP, Terminal Block

100 ohms

Wire Type

Network Wiring

One Unshielded Twisted Pair 24-16AWG (0.5-1.31mm mm) per video signal

Category Type

Cat 2 or better

Impedance

100 ± 20 ohms

DC Loop Resistance

52 ohms per 1,000 ft (18 ohms per 100 m)

Differential Capacitance

19 pF/ft max (62 pF/m max)

Wire Length

See Product Chart.

Power

No external power required

Environmental

Temperature

-20° to +75° C

Humidity (non-condensing)

0 to 95%

Transient Immunity

per ANSI/IEEE 587 C62.41

Mechanical

Dimensions excluding brackets and connectors

17 in wide, 1.7 in high, 8.125 in deep (43 cm wide, 4.5 cm high, 20 cm deep)

Weight

5 lbs (2.2 kg)

Accesories

Mounting

Two 0.175 in (4.4 mm) diameter holes 2.5 in (63.5 mm) apart

Cables

Eight 2ft (60cm) coax jumpers and one 7ft (2m) ground wire

* Specifications subject to change without notice.


Features

Use with the NV–214A–M, NV–413A, NV–813A, NV–1613A, or NV–3213A as a rack-mountable passive transmitter or receiver at distances up to 750ft (225m) **

Use with the NV–452R, NV–652R, NV–862R, NV–1662R, or NV–3262R as a rack-mountable passive transmitter for distances up to 3,000ft (1km)

High-Density 19" 1U high enclosure features 8 ports

Compatible with qualified OEM cameras

No power required

Built-in transient protection

Supports "up-the coax" type P/T/Z control signals up to 750ft (225m)

Hub Kit includes 8 2-foot (60cm) coax jumper cables & rackmount hardware

View Typical Application
Download Datasheet
View A&E Spec


Download Architectural Drawings

HOME  |  PRODUCTS |  APPLICATIONS |  LEARNING CENTER  |  SALES |  ABOUT NVT |  WHAT’S NEW  |  INTERNATIONAL  |  CONTACT US