|
Model NV-716J-PVD Cable Integrator
Typically installed in the wiring closet or IDF room, the NV–716J–PVD is a passive "pass-through" wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom data onto a minimum of 4–pair RJ45 cables.
Power, video and data are converted at the camera using the NV–218A–PVD transceiver which utilizes a single 4–pair cable with RJ45 connectors to deliver each camera's signals to the NV–716J–PVD. Up to sixteen cameras are supported. The NV–716J–PVD receives low-voltage camera power from any third-party multi-output Class 2 power supply. Control Room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. Data, if required, passes through another 4-pair RJ45 cable. Control Room connections may be made using the NV–413A, NV–452R, , NV–813J, NV–1613J, , NV–3213J, NV–862J, NV–1662J, or NV–3262J. All equipment employs industry-standard EIA/TIA 568B pinouts.
NV-716J-PVD
|
Specifications *
|
|
Video
|
|
Impedance
|
|
UTP RJ-45 Connectors
|
100 ohms
|
|
Power
|
|
16 to 24AWG (0.5mm to 1.3mm)
|
|
Power Distance Chart
|
|
Power Supply Voltage
|
24 VAC
|
28 VAC
|
12 VDC
|
|
Resultant Camera Voltage
|
21 VAC
|
21 VAC
|
11.5 VAC
|
|
100 mA B&W Camera
|
|
Dual 24 AWG
|
1,000ft
|
2,500ft
|
175ft
|
|
Dual 22 AWG
|
1,500ft
|
4,000ft
|
300ft
|
|
300 mA Color Camera
|
|
Dual 24 AWG
|
350ft
|
850ft
|
50ft
|
|
Dual 22 AWG
|
600ft
|
1,400ft
|
100ft
|
|
1 Amp P/T/Z Camera
|
|
Dual 24 AWG
|
100ft
|
250ft
|
15ft
|
|
Dual 22 AWG
|
150ft
|
400ft
|
300ft
|
Notes: wire can be category 2 or better. low-voltage camera power, video, and RS-422 or RS-485 may be sent within the same wire bundle. Do not run 24 VAC or 28 VAC in the same wire bundle with other telecom or datacom signals.
|
|
Environmental
|
|
Temperature
|
-20 to +75 C
|
|
Humidity (non-condensing)
|
0 to 95%
|
|
Mechanical
|
|
Dimensions, including connectors
|
19" wide, 1.73" high, .8" deep (482mm wide, 44mm high, 21mm deep)
|
|
Weight
|
0.94lb (0.43kg)
|
|
Mounting
|
Rack Mount
|
|
* Specifications subject to change without notice.
|
|
 |
|
|
Features
Connectivity for up to sixteen cameras, each via a single RJ45 4-pair cable
Use with the NV–218A–PVD power-video-data transceiver at the camera
Uses any third-party power supply to power cameras via UTP over significant distances (see Power Distance Chart)
Cable-management solution from the camera to the Wiring Closet and on to the Control Room
1U high; 1" deep; wall or rack-mountable
|
|
|
|
Download Architectural Drawings
|
