|
Model NV-4PS10-PVD Power Supply Cable Integrator Hub
The NVT model NV-4PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 4 cameras, all over UTP wire. Designed for installation in the wiring / IDF telecom closet, or at the Control / /MDF room the NV-4PS10-PVD consolidates connectivity via standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pinouts.
At the camera, Power, Video and Data connections are made using the NV-216A-PV (power-video only) NV-218A-PVD, or NV-226J-PV transceiver via an RJ45 connector and a single 34-pair cable. Control / MDF room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. Telemetry data, if required, passes through the NV-4PS10-PVD's data path and is connected to the controller via a second 4-pair RJ45 cable.
NV-4PS10-PVD
Specifications * |
Camera Power-Video-Data Connections |
|
See Camera Connections
|
Power Output |
|
Each camera is powered by a fully isolated (floating) Class 2 SELV output, individually switchable 24VAC / Off / 28VAC at up to 1 Amp. Each output is individually thermistor protected.
|
Wire Distance |
Supply voltage, wire resistance and minimum camera operating voltage determine the maximum camera distance. Assume a minimum 21VAC or 11.5VDC at the camera. See power distance chart. |
See Product Chart. |
Front-Panel LEDs |
Blue LED |
System Power On |
Per-channel LED indicates: |
Off |
No load connected |
Green |
Load connected & working |
Amber |
Mis-wiring detected |
Red |
Overload shutdown condition |
Control Room Video |
|
See Video Connections
|
Control Room Data |
|
See Data Connections
|
Power Input |
On-off switch |
Rear panel |
Voltage |
115 / 230 VAC |
Current |
2.5 / 1.25 Amps |
Frequency |
50 / 60 Hz |
Protection |
5 A slo-blo 8x20 mm fuse & thermal shutdown |
Wattage |
125 Watts |
Heat |
50 BTU / Hour (power supply only)
420 BTU / Hour (power supply with cameras) |
Environmental |
Ambient Temperature |
0 to 140 F (-20 to +50 C) |
Minimum Airflow |
4 ft 3/min (0.1m 3/min) |
Humidity (non-condensing) |
0 to 95% |
Transient Immunity |
per ANSI/IEEE 587 C62.41 |
Mechanical |
Dimensions, including connectors |
9.25 in. wide, 1.75 in. high, 7.25 in. deep
235 mm wide, 44.5 mm high, 184 mm deep |
Weight |
7 lb. (3.2kg) |
Mounting |
Mounting Rackmount "L" brackets and rubber feet for desktop applications included |
Regulatory |
|
|
* Specifications subject to change without notice. |
|
 |
|
|
Features
Provides Class 2 SELV camera power and pass-through video & telemetry data connectivity for up to 4 cameras, each via a single RJ45 4-pair UTP cable
Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B
Independently selectable 24 or 28 VAC with 1 Amp max per channel
Automatic-reset fault protection; transient protection
Individually floating outputs ensure total ground-loop immunity
Diagnostic LEDs show load/no load, miswires, and overload conditions
Use with the NV-216A-PV or the NV-218A-PVD or the NV-226J-PV transceiver at the camera
Power cameras via UTP over significant distances (see power chart)
1.75" high x 7.25" deep x 9.25" wide, wall or desk mount
Limited lifetime warranty
|
|
|
|
Download Architectural Drawings
|
