NVT
International Sites
Network Video Technologies HomeProductsApplicationsLearning CenterSalesAbout UsWhat’s NewContact Us
Products

NV-418A Dual Video/Audio Transceiver

The NVT Model NV-418A Dual Video/Audio Transceiver is a passive (non-amplified) device that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported.

Applications include Security/Surveillance, Video Distribution, Video Conferencing, or Distance Learning.

The unparalleled interference rejection and low emissions of the Model NV-418A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. Up-the-coax type signal may be sent over the same wire pair.

The NV-418A comes with an RJ-45 patch-cord. For Rack-mounting, use the NV-418AR.

Specifications *

Audio

Attenuation

20 Hz to 20 KHz

1.5 dB typ

Impedance

600 ohms

Signal

Line Level

+4 dBm max

Video

Attenuation

DC to 5 Mhz

1.5 dB max

Common-mode rejection

15KHz to 5 Mhz

60 dB typ

Impedance

Coax, female BNC

75 ohms

UTP, Screw Terminals

100 ohms

Wire Type

Network Wiring

One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) per signal

Category Type

Cat 2 or better

Impedance

100 ± 20 ohms

DC Loop Resistance

26 ohms max

Differential Capacitance

19 pF/ft max

Wire Length, camera to monitor including coax

1,000 ft max (300 m).

Connector Interfaces

Video/Audio

Female RCA jacks

Network Interface

RJ45 Non-keyed Jack

Power

No external power required

Environmental

Temperature

0 to +50° C

Humidity (non-condensing)

0 to 95%

ESD Susceptibility (200 pf probe)

20 KV

Mechanical

Dimensions excluding BNC

3.75 x 2.50 x 0.40 in (95.2 x 63.5 x 10.1 mm)

Weight

4.0 oz (113 g)

Material

Gray ABS

Mounting

Two 3M Dual Lock adhesive strips

* Specifications subject to change without notice.

** For digital recording applications, it is recommended that Passive to Passive transmission (Example: NV–213A to NV-213A) distances be limited to no more than 750ft. For distances greater than 750 ft, please use an NVT Active Receiver product.


Features

Dual Full-motion monochrome or color video and audio at distances up to: 1,000ft (300m) when used with another NV-418A, 3,000ft (1km) when used with an active receiver such as the NV-518A.

No power required

Exceptional interference rejection

Supports "up-the-coax" type control signals

RJ-45 and RCA jack connections

Limited lifetime warranty

View Typical Application
Download Datasheet
View A&E Spec


Download Architectural Drawings

HOME  |  PRODUCTS |  APPLICATIONS |  LEARNING CENTER  |  SALES |  ABOUT NVT |  WHAT’S NEW  |  INTERNATIONAL  |  CONTACT US