NVT
International Sites
Network Video Technologies HomeProductsApplicationsLearning CenterSalesAbout UsWhat’s NewContact Us
Products

NV-413A

The NVT Model NV-413A Video Transceivers are passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.  Baseband (composite) signals of any type are supported.

“Up-the-coax” type P/T/Z signals may be sent over the same wire pair.  Used as a receiver, the NV-413A is fully compatible with qualified OEM cameras that are equipped with an NVT twisted-pair output.

The unparalleled interference rejection and low emissions of the Model NV-413A allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. With built-in transient protection, damaging voltage spike problems are eliminated.

NV-413A

Specifications *

Video

Attenuation

DC to 5 MHz

0.5 dB typ

Common-mode/Differential-mode Rejection

15KHz to 5 Mhz

60 dB typ

Impedance

Coax, female BNC

75 ohms

UTP, Terminal Block or RJ-45

100 ohms

Wire Type

Network Wiring

One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm)

Category Type

Cat 2 or better

Impedance

100 ± 20 ohms

DC Loop Resistance

52 ohms per 1,000 ft (18 ohms per 100 m)

Differential Capacitance

19 pF/ft max (62 pF/m max)

Wire Length

See Product Chart

Power

No external power required

Environmental

Temperature

-20° to +75° C

Humidity (non-condensing)

0 to 95%

Transient Immunity

per ANSI/IEEE 587 C62.41

Mechanical

Dimensions excluding connectors

7.3 x 2.35 x 1.65 in (184 x 60 x 41 mm)

Weight

12 oz (340 g)

Material

Black ABS

Mounting

Two 0.175 in (4.4 mm) diameter holes 6.75 in (171.5 mm) apart

Up to two NV-413As are supported by the NV-RM 8/10 Rack Panel.

* Specifications subject to change without notice.


Features

Four passive transceiver channels in one product

Full-motion monochrome or color video at distances up to 750ft (225m) when used with the NV–214A–M, NV-413A, NV–813A, NV–1613A, or NV-3213A. **

Up to 3,000ft (1km) with active receivers, NV-452R, NV–652R, NV–862R, NV–1662R, or NV–3262R.

Supports "up-the-coax" type P/T/Z control signals up to 750ft (225m)

No power required

Exceptional interference rejection

Built-in transient protection

Compatible with qualified OEM cameras

Up to two NV–413As may be rack mounted using the NV-RM8/10 Rack Panel Kit

Limited lifetime warranty

View Typical Application
Download Datasheet
View A&E Spec


Download Architectural Drawings

HOME  |  PRODUCTS |  APPLICATIONS |  LEARNING CENTER  |  SALES |  ABOUT NVT |  WHAT’S NEW  |  INTERNATIONAL  |  CONTACT US