NVT
International Sites
Network Video Technologies HomeProductsApplicationsLearning CenterSalesAbout UsWhat’s NewContact Us
Products

NV-3213 

The NVT Model NV-3213 is a 32 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

“Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).

The unparalleled interference rejection ability of the Model NV-3213 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent.

Specifications *

Video

Frequency Response

DC to 5 Mhz

Attennuation

0.5 dB typ

Common-mode / Differential-mode Rejection

15KHz to 5 Mhz

60 dB typ

Impedance

Coax, female BNC

75 ohms

UTP, Terminal Block or RJ45

100 ohms

Wire Type

Network Wiring

One Unshielded Twisted Pair
24-16AWG (0.5-1.31mm) per video signal

Category Type

2 or better

Impedance

100 ± 20 ohms

DC Loop Resistance

52 ohms per 1,000ft (18 ohms per 100m)

Differential Capacitance

19 pF/ft max (62 pF/m max)

Wire Length

See Product Chart.

Power

No external power required

Environmental

Temperature

-20° to +75° C

Humidity (non-condensing)

0 to 95%

Transient Immunity

per ANSI/IEEE 587 C62.41

Mechanical

Dimensions excluding brackets and connectors

17 in wide, 1.7 in high, 8.125 in deep (43 cm wide, 4.5 cm high, 20 cm deep)

Weight

6.6 lbs (3.0 kg)

Accesories

Mounting

Two 0.175 in (4.4 mm) diameter holes 2.5 in (63.5 mm) apart

Cables

Thirty-two 2ft (60cm) coax jumpers and one 7ft (2m) ground wire

Adaptors

Eight 2ft (60cm) coax jumpers and one 7ft (2m) ground wire

* Specifications subject to change without notice.


Features

Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver at distances up to 750ft (225m)

Use with any NVT active receiver or hub as a rack-mountable passive transmitter for distances up to 3,000ft (1km)

High-Density 19" 1U high enclosure features 32 ports

RJ45 video input with optional
NV-RJ45A RJ45 to screw terminal adaptors included

No power required

Built-in transient protection

Supports “up-the coax” type control signal up to 750ft (225m)

Includes 32 2ft (60cm) coax jumper cables & rackmount hardware

Limited lifetime warranty

View Typical Application
Download Datasheet
View A&E Spec


Download Architectural Drawings

HOME  |  PRODUCTS |  APPLICATIONS |  LEARNING CENTER  |  SALES |  ABOUT NVT |  WHAT’S NEW  |  INTERNATIONAL  |  CONTACT US