|
Model NV-218A-PVD Video Transceiver
The NVT Model NV-218A-PVD Video Transceiver with Power and Data is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
This new product incorporates the transceiver engine of NVT's popular NV–213A video transceiver with the added value of Power and Data connections to and from the camera. Power, Video and Data are routed via UTP and RJ45 or "press-fit" terminal block inputs/outputs. Used at the camera, the passive NV-218A-PVD has a 9" mini-coax pigtail lead for direct video output connection from the camera. Along side this coax lead are two sets of "press-fit" terminal blocks for quick pass through connections for your camera's Power and Data. On the "house" or output side of the product you have the option of using convenient "press-fit" UTP connectors or the more efficient RJ45.
The unparalleled interference rejection and low emissions of the NV–218A–PVD allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV–214A carries a limited lifetime warranty and is UL and cUL listed.
NV-218A-PVD
|
Specifications *
|
|
Video
|
| Frequency Response |
|
DC to 5 MHz
|
|
Attenuation
|
|
0.5 dB typ
|
|
Common–mode/Differential-mode Rejection
|
|
50KHz to 5 Mhz
|
60 dB typ
|
|
Impedance
|
|
Coax, male BNC
|
75 ohms
|
|
UTP (Screwless) Terminal Block
|
100 ohms
|
|
UTP RJ45 Data Connector
|
100 ohms
|
|
Wire Type
|
|
Network Wiring
|
One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm)
|
|
Category Type
|
2 or better
|
|
Impedance
|
100 ± 20 ohms
|
|
DC Loop Resistance
|
52 ohms per 1,000 ft (18 ohms per 100m)
|
|
Differential Capacitance
|
19 pF/ft max (62pF/m max)
|
|
Wire Length
|
See Product Chart.
|
|
Power
|
|
No external power required
|
|
Environmental
|
|
Temperature
|
-20 to +75 C
|
|
Humidity (non-condensing)
|
0 to 95%
|
|
Transient Immunity
|
per ANSI/IEEE 587 C62.41
|
|
Mechanical
|
|
Body Length
|
1.50 inches (38mm)
|
|
Body Depth
|
0.85 inches (22mm)
|
|
Body Height
|
1.54 inches (39mm)
|
|
Pigtail Length
|
9 inches (228mm)
|
|
Weight
|
2.0 oz (60g)
|
|
* Specifications subject to change without notice.
|
|
 |
|
|
Features
Power-Video-Data (PVD) signals are routed via UTP and RJ45 or "Press-Fit" terminal block for organized pass-through of inputs/outputs
Mini-coax pigtail supports in-camera mounting in most dome cameras
Use with the RJ45 connector based NV–704J–PVD or the NV–716J–PVD for organized cable management to your control equipment from the IDF
Up to 3,000ft (1km) with an NVT active receiver or hub
Supports "up-the-coax" type control signal up to 750ft (225m)
Exceptional interference rejection
Built-in transient protection
|
|
|
|
Download Architectural Drawings
|
