|
Model NV-216A-PV Video Transceiver
The NVT Model NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
The NVT Model NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT’s popular NV-213A video transceiver with the added value of camera power connections. Power and Video are routed via UTP and RJ45 connections. Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT’s PVDTM product line. Connect the RJ45 to 4-pair cable to be routed to the NVT cable integrator and on to an active or passive receiver hub in the MDF/Control Room.
The unparalleled interference rejection and low emissions of the NV-216A-PV allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV-216A-PV carries a limited lifetime warranty and is UL and cUL listed.
NV-216A-PV
|
Specifications *
|
|
Video
|
|
Attenuation
|
|
DC to 5 Mhz
|
0.5 dB typ
|
|
Common–mode/Differential-mode Rejection
|
|
50KHz to 5 Mhz
|
60 dB typ
|
|
Impedance
|
|
Coax, male BNC
|
75 ohms
|
|
UTP, RJ45 Data Connector
|
100 ohms
|
|
Wire Type
|
|
Network Wiring
|
One Unshielded Twisted Pair 24-16 AWG (0,5-1,31mm)
|
|
Category Type
|
2 or better
|
|
Impedance
|
100 ± 20 ohms
|
|
DC Loop Resistance
|
52 ohms per 1,000 ft (18 ohms per 100m)
|
|
Differential Capacitance
|
19 pF/ft max (62pF/m max)
|
|
Wire Length, camera to monitor including coax
|
See Product Chart.
|
|
Environmental
|
|
Temperature
|
-20 to +75 C
|
|
Humidity (non-condensing)
|
0 to 95%
|
|
Transient Immunity
|
per ANSI/IEEE 587 C62.41
|
|
Mechanical
|
|
Body Length
|
1.6" (40.6mm)
|
|
Body Depth
|
0.88" (22mm)
|
|
Body Height (not including BNC)
|
.81" (20.5mm)
|
|
Weight
|
1.0 oz. (30 g)
|
|
* Specifications subject to change without notice.
|
|
 |
|
|
Features
Power-Video (PV) signals are routed via UTP and RJ45
Use with the RJ45 connector based NV-704J-PVD, NV-716J-PVD, NV-8PS13-PVD, NV-16PS13-PVD or the NV-16PS10-PVD for organized cable management to your control equipment from the IDF
Supports “up-the-coax” type control signal up to 750ft (225m)
Exceptional interference rejection
Built-in transient protection
Limited lifetime warranty
|
|
|
|
Download Architectural Drawings
|
