NVT
International Sites
Network Video Technologies HomeProductsApplicationsLearning CenterSalesAbout UsWhat’s NewContact Us
Products

Model NV-208A-M Video Transceiver

The NVT Model NV-208A-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.

An improvement over NVT’s popular NV-213A video transceiver, the NV-208A-M features a Screwless UTP terminal block and Male BNC allowing connection directly to the camera or DVR. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT’s passive products for applications under 750ft (225m). The NV-208A-M Video Transceiver also incorporates new improved transient protection that eliminates the need for a ground screw.

The unparalleled interference rejection and low emissions of the NV-208A-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. As with all NVT products, the NV-208A-M carries a limited lifetime warranty and is UL and cUL listed and CE compliant.

NV-208A-M

Specifications *

Video

Attenuation

DC to 5 Mhz

0.5 dB typ

Common–mode/Differential-mode Rejection

50KHz to 5 Mhz

60 dB typ

Impedance

Coax, male BNC

75 ohms

UTP, Terminal Block

100 ohms

Wire Type

Network Wiring

One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm)

Category Type

2 or better

Impedance

100 ± 20 ohms

DC Loop Resistance

52 ohms per 1,000 ft (18 ohms per 100m)

Differential Capacitance

19 pF/ft max (62pF/m max)

Wire Length, camera to monitor including coax

See Product Chart.

Power

No external power required

Environmental

Temperature

-20 to +75 C

Humidity (non-condensing)

0 to 95%

Transient Immunity

per ANSI/IEEE 587 C62.41

Mechanical

Body Length

1.7" (43mm)

Body Height

0.8" (21mm)

Body Width

0.6" (14.5mm)

Weight

1.1 oz. (34 g)

* Specifications subject to change without notice.


Features

Full-motion CCTV video at distances up to 750ft (225m) when used with any passive NVT transceiver or hub with NV-413A, NV-813A, NV-1613A or NV-3213A.

Up to 3,000ft (1km) with active receiver or hub with NV-452R, NV-652R, NV-862R, NV-1662R or NV-3262R

Male BNC allows connection directly to the camera or DVR

Reliable Screwless UTP terminal connection

Supports “up-the-coax” type control signal up to 750ft (225m)

No power required

Exceptional interference rejection

Built-in transient protection

Limited lifetime warranty

View Typical Application
Download Datasheet
View A&E Spec


Download Architectural Drawings

HOME  |  PRODUCTS |  APPLICATIONS |  LEARNING CENTER  |  SALES |  ABOUT NVT |  WHAT’S NEW  |  INTERNATIONAL  |  CONTACT US