|
NV-1613
The NVT Model NV-1613 is a 16 port passive transceiver hub that allow transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported.
“Up-the-coax” type signal may be sent over the same wire pair at distances up to 750ft (225m).
The unparalleled interference rejection ability of the Model NV-1613 Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent.
|
Specifications *
|
|
Video
|
|
Frequency Response
|
|
DC to 5 Mhz
|
|
Attennuation
|
|
0.5 dB typ
|
|
Common-mode / Differential-mode Rejection
|
|
15KHz to 5 Mhz
|
60 dB typ
|
|
Impedance
|
|
Coax, female BNC
|
75 ohms
|
|
UTP, Terminal Block or RJ45
|
100 ohms
|
|
Wire Type
|
|
Network Wiring
|
One Unshielded Twisted Pair 24-16AWG (0.5-1.31mm mm) per video signal
|
|
Category Type
|
Cat 2 or better
|
|
Impedance
|
100 ± 20 ohms
|
|
DC Loop Resistance
|
52 ohms per 1,000ft (18 ohms per 100m)
|
|
Differential Capacitance
|
19 pF/ft max (62 pF/m max)
|
|
Wire Length
|
See Product Chart.
|
|
Power
|
|
No external power required
|
|
Environmental
|
|
Temperature
|
-20° to +75° C
|
|
Humidity (non-condensing)
|
0 to 95%
|
|
Transient Immunity
|
per ANSI/IEEE 587 C62.41
|
|
Mechanical
|
|
Dimensions excluding brackets and connectors
|
17 in wide, 1.7in. high, 8.125in. deep
(43cm wide, 4.5cm high, 20cm deep)
|
|
Weight
|
4.20 lbs (1.9 kg)
|
|
Accesories (included)
|
|
Mounting
|
Rack mount “L” brackets for front, rear, or wall installations; rubber feet for desk applications
|
|
Cables
|
Sixteen 2ft (60cm) coax jumpers and one 7ft (2m) ground wire
|
|
Adaptors
|
Includes four NV-RJ45A RJ45
to screw-terminal adaptors
|
|
* Specifications subject to change without notice.
|
** For digital recording applications, it is recommended that Passive to Passive transmission (Example: NV–211T–M to NV–213A) distances be limited to no more than 750ft. For distances greater than 750ft, please use an NVT Active Receiver product.
|
 |
|
|
Features
Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver at distances up to 750ft (225m)
Use with any NVT active receiver or hub as a rack-mountable passive transmitter for distances up to 3,000ft (1km)
High-Density 19" 1U high enclosure features 16 ports
RJ45 video input with optional
NV-RJ45A RJ45 to screw terminal adaptors included
No power required
Built-in transient protection
Supports “up-the coax” type control signal up to 750ft (225m)
Includes 16 2ft (60cm) coax jumper cables & rackmount hardware
Limited lifetime warranty
|
|
|
|
Download Architectural Drawings
|
